CLEARANCE CORNER
|
Vliestroom was built in the shipyards of Holland in 1987-1990 for the Dutch Ministry of Transport and Waterways.
Regular Price: $540.00 Special Price: $440.00
|
Compass rose Deans marine
Flower class corvette
1/96 Scale 26.5 x 4.5
Fiberglass Hull with Rubbing Strip Molded into the Hull. Deck, Cabin Assembly, Cast Metal & Plastic Fittings, Running Hardware, Prop, Prop Shafts, Rudders, Etched Brass Fittings, Full Size Plans & Instruction Manual all included in this Complete Kit.
Regular Price: $ 495.00 Special Price: $ 350.00
|
|
Sisapon deans marine
1/100 Scale 25 x 4.0
Regular Price: $ 360.00 Special Price: $ 230.00
|
s.t. seaman deans marine
1/72 Scale 15.75 x 3.5
Regular Price: $ 375.00 Special Price: $ 300.00
|
TRADEWINDS CHARACHTER SHIP MODELS
1/24 Scale 48 x 15 Freighter, tramp steamer, or inter island transport. By whatever name, these steam powered, broad beamed ships were used at the turn of the century to transport cargos of food, lumber, machinery and livestock between the islands in the Caribbean, the South Pacific and the Far East. Refitted with diesel engines in the 30s, many of these hard working ships retained their tall steam stacks and character until today. Included in semi-kit is: Hull with deck, deck house, deck house overhead, cargo hatch, bridge, bridge overhead and full scale drawings. MULTIPLE MOLDINGS IN SET
Regular Price: $ 795.00 Special Price: $ 500.00
|
Henrietta rose ferry character ship models
1/24 Scale 51 x 15
A multi-use, shallow draft vessel. The steam powered passenger ferry was often the only method of travel between islands up and down rivers. Passengers of the early 1900s rode in comfort in finely appointed cabins upon the main deck. A large hatch in the foreword deck gave access for cargos of trade goods. Crew quarters were located on the upper deck aft. Included with semi-kit is: hull w deck, main deck cabin, maindeck cabin overhead, pilot house, pilot house overhead, crew quarters, crew quarters overhead, boiler room and foreward hatch and full scale drawings. MULTIPLE MOLDINGS IN SET
Regular Price: $ 895.00 Special Price: $ 550.00
|
|
1/96 IOWA CLASS BATTLESHIP HULL W/INSTALLED RUNNING GEAR, HULL BRACINGS & PRE-CUT DECK
Also Included: props, shafts, struts, stuffing boxes and rudders. Deck is pre-cut and made of Lexan and a set of Plans is also included.
Originally priced at: $ 1200.00
Clearance price: $ 800.00
Also available:
1/96 iowa superstructure set $ 200.00
1/96 iowa motors, gear sets & universals $ 100.00
speed controls $ 100.00 ea. |
IOWA HULL PICTURES
|
|
|
|
|
|
|
