UHU-Hart:   A very fast setting and glues ABS plastic!

Absolutely clear, ultra lightweight and strong when dried. This is the best selling model airplane cement in Germany. It dries so fast on balsa joints its almost like using CA. It is extremely strong and light. It slightly melts ABS plastic so it makes both a glue bond and a “weld” on ABS parts like boat hulls and airplane plastic fuselages.

ITEM #

DESCRIPTION-SIZE

PRICE

GR9534

UHU-HART 1-OUNCE ADHESIVE

GR9535

UHU-HART 4-OUNCE ADHESIVE

STABILIT EXPRESS

As an adhesive Stabilit Express will firmly adhere anything to anything else. It is unsurpassed for joining such critical things as a nylon bellcrank to a fiberglass fuselage, or metal or plastic tubes to plastic or fiberglass. It is a two part methylacrylic adhesive. The material sets in only 20 minutes into a wood-colored mass. The fully cured material can be sanded and finished. The cured material has both compression and tensile strength, so it can be used as a structural element in addition to simply bonding other structures.

ITEM #

DESCRIPTION-SIZE

PRICE

GR9601

STABILIT EXPRESS 1-OUNCE ADHESIVE

GR9602

STABILIT EXPRESS 3-OUNCE ADHESIVE

P.F.M. ADHESIVE - SEALANT

PFM is a one part, quick setting adhesive and sealant that glues just about anything to anything else. It will melt foam however. It sets in about 30 minutes. PFM sets but doesn't get brittle; it will give without letting go. PFM is non-flammable.
PFM can repair electrical insulation, give strain relief to electric connectors, glue servos in place, glue servo trays and bulkheads in fiberglass fuselages. PFM is the indispensable glue in your workshop, thousands of uses and counting.

ITEM #

DESCRIPTION-SIZE

PRICE

HLIMP001

PFM SEALANT ADHESIVE