|
|
|
|
DETAIL ACCESSORIES
POND YACHT TURNBUCKLES
These are specially designed Heavy Duty Turnbuckles expressly intended for Pond Yacht Models.
This part is hand-machined out of Brass and uses a 4-40 thread for extra holding power.
There is an eye on the RH thread end and a hook on the LH thread end. The body is 1.5” long and ¼” diameter.
MYF-15025-EH 4-40 $15.00 Ea.
A special variation of the above Turnbuckle: The Body is manufactured from 5-32” Hex Stock and has Shackle at one end.
The other end has an Eye with a 2-56 thread.
MYF-TB-PB1 $15.00 Ea.
A larger version of the above Turnbuckle is machined out of 3/16: Hex Stock.
There is a heavy duty Shackle on one (1) end and an Eye with a 4-40 thread on the other.
MYF-TB-PB2 $15.00 Ea.
Custom Machine Port Holes are available in diameters of .75” to 1.25”. Each Port Hole has a plexiglass
window which is held in place with a presses sleeve. A six (6) hole Bolt Pattern has been machined into the outer Flange.
Contact us with your needs or For Pricing & Delivery times. We are also able to supply machined Brass
Cleats in sizes from .75” to 1.25” long with two (2) .060” Mounting Holes. Both of the Portholes and Cleats are available for
CONTACT US TO ORDER.
Finally, we have three (3) varieties of Brass Blocks available. These are constructed out of high grade
Brass and are working (operational) units.
MYF-BLOCK-340F |
This Block is .34” Diameter and has a fixed Mounting Eye to be secured with a Cotter Pin. |
$ 17.50 |
MYF-BLOCK-440 |
This Block is .44” in Diameter and has a fixed slot to be pinned for termination. |
$ 17.50 |
MYF-BLOCK-340E |
This Block is .44” in Diameter and is terminated in a Mounting Eye that can swivel up to 180 degrees. |
$ 17.50 |