GLS-1 -SCUTTLE SET-9 (**) This set provides fully detailed Scuttles & Eyebrows, (3 parts per assy). These give a flush glazed appearance & riveted surround to all Scuttles & even represent the internal butterfly nut detail visible just inside the Scuttle. Comes with re-drilling template + lots of finely etched gun sights for other 72nd projects. |
|
|
|
GLS-2 -DECK & FITTINGS SET (FLOWER CLASS CORVETTE) Contains: New Forecastle Deck with full surface detail, riveted side walling + locations for all of the other sets & kit parts you will add as assembly progresses. Overlays for the Main & Quarter Decks, Engine Room Decking, Bower & Kedge Anchors, 2 Styles Hawse Plates, Screw Stoppers, Rope Reels, Voice Pipes, Bollards & Fairleads. 4 Gun Screens, Breakwaters, After 4 gun Screen/Breakwater, Watertight hatch, Locker Units, Buoys, Jack-staff, Float Racks, Lifebelts & Frames. New Ward Room, Skylights + Engine Casing Companionway, Engine Room Skylight Kit, Davit Assembly & additional fittings. PE Sheet w/hundreds of fittings along with instruction and assembly sheet with color photographs. |
|
|
|
GLS-3 -TYPE C BRIDGE SET FLOWER CLASS CORVETTE A replacement assembly for the Type C Bridge equivalent as fitted to Snowberry, Bluebell & Others. New bridge supports, Type 271 Radar Installation, Asdic Control Compartment, Flag Locker, Life Belt Rack, Voice Pipes, 598 mm x 142 mm Etched Sheetage & several other castings. |
|
|
|
GLS-4 -FUNNEL & MAST SET FLOWER CLASS CORVETTE Contains New Metal Super-Detailed Scale Thickness Mast Unit with Crows Nest, Yard, Mast Lantern, Aerial & Stay Fittings. Ladder with rungs, Etched overlay for funnel kit, Steam release pipe, Ladder, Whistle, Siren, Top Frame & Yard arm units. |
|
|
|
GLS-5 -ROPE RAILS (**) Delicately cast Stanchions in high-grade metal for strength. They carry the main steel ropes that are present around the forecastle & engine room decks on most vessels. |
|
|
|
GLS-6 -33 PIPE RAILS (**) These units are for piping around the bridge & smaller deck areas. Pack of 24. |
|
|
|
GLS-7 -43 PIPE RAILS (**) These units are taller alternatives for the piping around the bridge & smaller deck areas. Pack of 24. |
|
|
|
GLS-8 -SPLINTER PADDING (** ) Pack of 12 Splinter Padding Sections as fitted around bridges & gun installations & other areas of smaller vessels. (2-packs required). |
|
|
|
GLS-9 -16 DINGHY & STOWAGE (**) Replacement in injection resin for the inaccurate kit item. A host of parts in etched brass & cast metal to complete a super detailed model. |
|
|
|
GLS-10 -27 WHALER & STOWAGE (**) Detailed hull in injection resin + a host of fine parts in etched brass & cast metal for the larger boat fitted to the starboard boat station. |
|
|
|
GLS-11 -OVAL CARLEY FLOATS (**) Replacement resin floats for the kit items, with etched multi-layered internal framework, paddles & roping. (2-pairs required). |
|
|
|
GLS-12 -RECTANGULAR CARLEY FLOATS (**) Larger rectangular floats with resin - etched multi-layered internal framework, paddles & roping. |
|
|
|
GLS-13 -WOODEN REVERSIBLE LIFERAFT (**) Etched brass & cast metal Merchant Shipping patterns of rectangular rafts. Internal tanks, paddles & ropes. |
|
WEAPONRY |
|
GLS-14 -4 GUN MARK IX BREECH LOADING GUN, INCL. BASE & SPARE SHELLS (**) Gun Bandstand with locations for fitting Deck & Fittings Set, Steps & Rails, Spare Shell Holders (with shells). Gun assembly, Square & round pattern Gun Shields, internal Bracing, Sliding Hatch, Gun Sight Detail & 3 Ammunition Locker Units. (Over 290 parts). |
|
|
|
GLS-15 -2 ROCKET FLARE SET (INCL. STOWAGE BOXES) Port & Starboard Rails, Cast Rockets, 4 Rocket stowage boxes. |
|
|
|
GLS-16 -HEDGEHOG ANTI-SUB WEAPON (**) Contains 24 Spigot Hedgehog ahead-throwing anti-submarine weapon, 55 parts in cast metal & etched brass. |
Price: |
|
|
GLS-17 -2 PDR. POM-POM GUN W/BANDSTAND & READY-USE AMMO. LOCKER (**) Finely etched Bandstand Assembly, ladders, support structure, detailed gun & mount, etched shield & sight details. 2-Lewis Gun Kits (twin .303), mounts & shields. |
Price: |
|
|
GLS-18 -20 MM OERLIKON GUNS (PR.) W/BASES, MOUNTS & READY-USE AMMO LOCKERS (**) 2-Cast Gun Base-well units, detailed overlays, cast & etched mount, 3-Ready-use Ammo Lockers & over 125 parts comes in this kit. |
Price: |
|
|
GLS-19 -MK. II DEPTH CHARGE SET Rails, Throwers, stowage chocks, 340 cast metal parts & etched brass, 4 MK II depth charge thrower,, mount depth charges, 4-depth charge davit assemblies, 14 side stowed depth charges & stowage chocks, 1-pair Depth charge Rails, 6- Smoke Floats, 2 x 7 Deck Mounted depth charge stowage racks. |
Price: |
|
|
GLS-19A DEPTH CHARGE ADDITIONS NEW These additions are the extra etched detail included for the more limited number of depth charges in this set for all of the depth charge castings in our Flower Class Corvette Depth Charge Set (GLS-19). |
Price: |
|
|
GLS-22 TWIN LEWIS GUN SET NEW This set contains two twin Lewis Gun assemblies with full magazine detail, mounts, shields and finely etched gun sights. Many corvettes carried additional Lewis guns to the two supplied with our 2 Pdr. Gun Set (GLS-17). |
Price: |
|
|
GLS-21 -LIFEBUOY SET (**) Contains four (4) Lifebuoys and mounting frame assemblies. Can be used to provide additional units to those included in our Corvette Deck & Fittings Set, or for any other 72nd Scale project. |
Price: |
|
|
GLS-20 -PROPELLER & RUDDER SET Fully detailed, Cast Brass, Corvette Propeller with Resin Rudder Unit of correct shape and scale thickness. |
Price: |
ROYAL NAVY COASTAL FORCES WEAPONS & FITTINGS SETS |
|
GLS-RN1 .303 VICKERS GAS OPERATED MG SET This set has been designed so that you can assemble either two twin-mounted guns or four single units. These weapons were fitted to almost all coastal Forces vessels. |
Price: |
|
|
GLS-RN2 - .303 LEWIS GUN SET This set contains two twin Lewis Gun assemblies with full magazine detail, mounts, shields and finely etched gun sights. |
Price: |
|
|
GLS-RN3 2 ROCKET FLARE LAUNCHER This pack contains four of these units, as carried by virtually all Coastal Forces vessels. |
Price: |
|
|
GLS-RN4 HOLMAN PROJECTOR This kit provides a super-detailed Mk. IIA version of this interesting but unsuccessful weapon that was, nonetheless, fitted to so many Coastal forces vessels. |
Price: |
|
|
GLS-RN5 18 TORPEDO AND TUBES SET Two resin tubes each with separate cast front ends that can be fitted to portray either loaded or empty tubes. The tubes are supplied with many fine details and with the support framework that fits to the girder framework that is individual to the vessel you are fitting the tubes to. In addition, a spare torpedo round is supplied together with chocks for two torpedoes. Two sets will obviously be required for vessels fitted with four tubes. In addition, saddles are provided for the fitting of .303 Vickers GO Machine Guns or 2 Rocket Flare Projectors both available in separate packs. |
Price: |
|
|
GLS-RN6 21 TORPEDO AND TUBES SET Two resin tubes each with separate cast front ends that can be fitted to portray either loaded or empty tubes. The tubes are supplied with many fine details and with the support framework that fits to the girder framework that is individual to the vessel you are fitting the tubes to. In addition, a spare torpedo round is supplied together with chocks for two torpedoes. Two sets will obviously be required for vessels fitted with four tubes. In addition, saddles are provided for the fitting of .303 Vickers GO Machine Guns or 2 Rocket Flare Projectors both available in separate packs. |
Price: |
|
|
GLS-RN7 TYPE A MINE SET This set provides four type A ground-influence mines with fully detailed chutes and deck location strips. These were usually carried in fours or eights on vessels that had been equipped for mine laying sorties. All the strapping and release gear is fully represented in this set. |
Price: |
|
|
GLS-RN8 SINGLE DEPTH CHARGE & CHUTE SET This set provides four single depth charge and chute units as carried on most Coastal Forces vessels. Sets can obviously be combined to fit out the larger boats. All the release gear is fully represented in this set, together with accurate mounting chocks. |
Price: |
|
|
GLS-RN-9 CHEMICAL SMOKE APPARATUS & SMOKE FLOAT SET This set provides eight standard and four smaller Mk. VI smoke floats + two of the later design of CSA (chlor-sulphonic acid) smoke units. |
Price: |
|
|
GLS-RN10 COASTAL FORCES GUARDRAIL SET This big etched set provides a large quantity of both two & three rung guardrail stanchions with both fixed and moveable bases, so that they can be fixed to your coastal forces vessels whatever the individual armament layout you have chosen for it. Also included are large quantities of thimble, lashing, spring hook and eye nut detail + mesh screens. All this provides for total versatility, enabling fully accurate guardrail layouts to be produced. A super-value set that will fit out one of the largest of Coastal forces vessels and up to two of the smaller ones. |
Price: |