HOVERCRAFT PARTS

Avenger AV2X AM

AIRTRONICS RADIO SYSTEM

2 Channel Radio, 2 Stick - Includes (1) 94102Z Servos, requires 8 Dry Battery (AA Size) Features: - 2 Channel AM - Servo Reversing - Mini Receiver - Nicad Charge jack - LED Power Indicator with Low Voltage Alarm System - Slide Trims - Includes ratchet throttle option kit. There's no better way to get into R/C Hovercraft modeling than with the Avenger AV2X R/C System Combining high quality components, top-level design and a healthy dose of high performance features, the Avenger AV2X is a superb all around value.

Hover Radio Price: 

ILC Module for Griffon 2000TDX Hovercraft

The Independent Lift Control (ILC^TM) module was  developed specifically for this craft. It allows the thrust motors to be controlled for full forward or reverse thrust and at the same time maintaining throttle control of the lift motor. This is achieved on a standard 2 channel radio with no modifications and using standard size servos and speed controllers. Just insert the ILC module between your forward/reverse speed controller and you have control of lift throttle and still have lift forward and reverse throttle as well. Full installation instructions included.

ICL PRICE: 

20 Amp Electronic Speed Controller

20 Amp Electronic Speed Controller (ESC) for use with all our kits. This speed controller is very small and light-weight. It is ideal for Hovercraft use where space is tight and weight is very important. It offers forward speed control from the throttle on your transmitter. It has a auto cut off when the battery is low and is simple to use with auto setup on installation. Ideal for use with all our kits This speed controller can be used with our kits. Note: For forward motor direction use only. This ESC comes with connectors and a fuse which you need to fit and wire to suit your installation.

SPEED CTRL PRICE: 

20 Amp Forward/Reverse Electronic Speed Controller

Radio Control - Electronic Speed Controller, with forward and reverse control Can used for up to 20 Amp motors or a 20 Amp combination of motors. (2 x 400 motors). Features forward and reverse control for the thrust motor when using a 3 or 4 channel radio set up. This ESC is selected for use with reversible thrust with the following kits: ElectroCruiser, Hover Demon, SK5, SR.N5 Can be used with 330, 400 and 480 size motors for other model hovercraft applications when throttle and forward/reverse control is required for thrust via the radio control link. Can be set for forward control only and also features BEC.

FOR/REV PRICE: