RESISTANCE SOLDERING ACCESSORIES
FOOT SWITCH – MODEL # 10519 – PRICE: For foot control of most power units up to and including 1800 Watts. Eliminates sparking on contact and removal of electrodes from work. Provides more accurate timing of soldering operations. Recommended in most applications. A rugged, industrial switch with six foot (1.83m) three-wire cord and NEMA 5-15 P/R piggyback plug.
|
|
GROUNDING VISE FOR HOLDING SMALL PARTS HANDS FREE – MODEL # 105V12 – PRICE: For foot control of most power units up to and including 1800 Watts. Eliminates sparking on contact and removal of electrodes from work. Provides more accurate timing of soldering operations. Recommended in most applications. A rugged, industrial switch with six foot (1.83m) three-wire cord and NEMA 5-15 P/R piggyback plug.
|
|
LEAD FOR RETURN CURRENT – MODEL # 10512A PRICE: Specifications:
Used with the following tools: · 10515 - 3/32 Inch Diameter Single Carbon Handpiece · 10572 - 1/8 Inch Diameter Single Carbon Handpiece · 10573 - 3/16 Inch Diameter Single Carbon Handpiece · 10552 - 5/64 Inch Diameter Single Stainless Steel Handpiece
|
|
LEAD FOR RETURN CURRENT – MODEL # 10512 PRICE: Specifications:
Used with the following tool: · 10511 - Standard 1/4 Inch Diameter Single Carbon Handpiece
|
|
LEAD FOR RETURN CURRENT – MODEL # 10537 PRICE: Specifications:
· Used with the following tool:
|
|
PANEL ATTACHMENT – MODEL # 10595 - PRICE:
Attaches to Power Units 105A3 or 105A12 to hold two 1/8" (3.18mm) diameter, adjustable electrodes. Takes the place of "standing soldering iron", but draws full current only when working. For soldering and desoldering. Popular for auto-electric remanufacturing. |
|
PANEL ATTACHMENT – MODEL # 10513A PRICE: Attaches to Model 105B2 Power Unit to hold two electrodes. Comes with two 1/2" (12.7mm) diameter carbon electrodes. Used to desolder and assemble automotive alternators, starters for autoelectric rebuild, bus bar and similar electrical work.
|
|
PANEL ATTACHMENT – MODEL # 10531B PRICE:
Same as Model 10513A, except for use with Power Unit Model 105C1.
|
|
ADAPTER – MODEL # 105Y10 – PRICE: $ 31.51 Connects both jaws of soldering tweezers to one terminal of power unit. Must use with a grounding accessory, Model 10512 recommened. The part held by tweezers is heated when in contact with grounded workpiece. The result is more even heating between the two electrodes of the handpiece. Excellent for hobbyists for brass locomotives and scratch building.
|
|