|
During the development stage of our model of the U 47 we
concentrated especially on maximum possible scale fidelity, and accurate
reproduction of the detail features of the vessel. In spite of its impressive
length of more than 1.7 m, the boat is highly maneuverable and has a good
turn of speed. It features the dynamic method of submerging, and all these
features make for a highly realistic model when in and under the water.
An important feature of this imposing boat is the flooding slots in the outer
skin, and these are factory-cut in order to shorten the building time. This
eliminates the time-consuming work of drilling or machining these openings.
- Pressure vessel consisting of thick-walled plastic
tube
- O-rings and ready-made molded parts to seal the
pressure vessel
- Removable installation plate housing the radio
control and power systems
- Mechanical diving depth regulator
- Rubber bellow seals
- All parts for rudders and hydroplanes
- Stern tubes, propeller shafts and propellers
- Electric motors and suppressors
- Vacuum-molded hull and conning tower components
- Injection-molded cannon parts and other fittings
- Pre-cut flooding slots
- Decal sheet
- Building instructions and plan
|
 
66.92”
X 6.29”
1/40
SCALE
RO-1114
KIT PRICE: $ 635.00
|